|
|
Bulbex
Commonly used in soft materials & fiberglass, this unique rivet
when installed breaks into 3 separate bands. The load is evenly
distributed & protects the integrity of these more fragile materials.
Application flaws such as oversized holes can be corrected by using
these rivets. Bulbex rivets can also be used in a broader range
of material thickness & often eliminate the need to carry several
sizes. |
|
|
Closed
End
Available in domed or countersunk heads, the closed end is exactly
what it claims to be: closed on the end. Unlike the open end which
exposes the nail on both top & bottom, the closed end literally
covers the head of the nail creating a barrier between the front
& back side of the application. Properly installed, closed end rivets
are water & vapor resistant. |
|
|
Multigrip
Multigrip rivets,
like the closed end have their name for a reason. This versatile
fastener can be used in "Multiple Grip Ranges". Most rivets have
a grip range (the thickness of material it has the ability to clamp)
that spans 1/8". This style often handles a range of more than ¼".
When properly installed, multigrips can provide a weather-tight
seal. Applications flaws such as oversized holes & varying material
thickness can be disguised by using multigrips. Using this style
can reduce inventory by replacing unnecessary sizes.
IFS offers the broadest selection of multigrips in the industry.
|
|
|
Open
End
Also referred to as "Break
Stem" rivets, this style is the most widely used. They are simple
to install & offer the best variety of material combinations. The
flange (head) braces against the topside of the material while the
rivet body forms a bulge on the backside, creating a tight clamp
for two or more layers. For softer materials create a larger bearing
surface with a "large flange" rivet, or use a washer to help absorb
the impact from installation. Need a smooth surface? Choose a countersunk
rivet. Will the rivet be in contact with food or exposed to moisture?
Choose stainless steel.
|
